How To Change Speedometer Display On Jeep Grand Cherokee

Musical instrument CLUSTER Brandish

Your vehicle will be equipped with an musical instrument cluster display, which offers useful information to the driver. With the ignition in the STOP/OFF mode, opening/closing of a door will activate the display for viewing, and brandish the total miles, or kilometers, in the odometer. Your instrument cluster display is designed to display important data about your vehicle's systems and features. Using a commuter interactive display located on the instrument panel, your instrument cluster display tin can evidence you how systems are working and give you warnings when they are non. The steering wheel mounted controls let you lot to scroll through the main menus and submenus. You can admission the specific data you want and make selections and adjustments.

Musical instrument Cluster Display Location And Controls

The instrument cluster display is located in the center of the instrument cluster.

Musical instrument Cluster Display Location And Controls

The Main Card items selectable in the driver interactive brandish consist of the following:

• Speedometer
• Vehicle Info
• Terrain — If Equipped
• SRT Operation — If Equipped
• Commuter Assist — If Equipped
• Fuel Economy
• Trip
• Stop/Showtime — If Equipped
• Audio
• Stored Messages
• Screen Setup
• Diagnostic — SRT
• Speed Warning — SRT

The system allows the driver to select information by pushing the following buttons mounted on the steering wheel:

Instrument Cluster Brandish Command Buttons

• Upward Arrow Button

Push and release the upwardly arrow push to scroll upward through the Principal Menu items.

• Down Arrow Push button

Button and release the down arrow button to roll downwardly through the Main Menu items.

• Right Pointer Push button

Push and release the right pointer push button to access the information screens or submenu screens of a main menu particular.

• Left Arrow Button

Push button and release the left arrow button to admission the information screens or submenu screens of a chief carte particular.

• OK Button

Push button the OK button to access/select the information screens or submenu screens of a Main Bill of fare item. Push and hold the OK arrow push button for 2 seconds to reset displayed/selected features that can be reset.

Oil Modify Reset — If Equipped

Your vehicle may be equipped with an engine oil change indicator system. The "Oil Alter Required" message will display in the instrument cluster display for five seconds subsequently a single chime has sounded to indicate the next scheduled oil modify interval. The engine oil modify indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style.

Unless reset, this message will continue to display each time you identify the ignition in the ON/RUN position. To plough off the message temporarily, push and release the OK push. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.

Oil Life Reset

Without pushing the brake pedal, place the ignition in the ON/RUN mode (do not beginning the engine).

Navigate to "Oil Life" submenu in "Vehicle Info" in the instrument cluster brandish.

Push and hold the OK button until the gauge resets to 100%.

Secondary Method For Oil Change Reset Procedure

1. Without pushing the brake pedal, place the ignition in the ON/RUN position (practice non beginning the engine).
2. Fully press the accelerator pedal, slowly, iii times within ten seconds.
3. Without pushing the restriction pedal, identify the ignition in the OFF/LOCK position.

Note:

If the indicator message illuminates when you start the vehicle, the oil change indicator system did non reset. If necessary, echo this procedure.

Instrument Cluster Display Messages

Includes the post-obit, just non limited to:

• Front Seatbelts Unbuckled
• Commuter Seat Belt Unbuckled
• Passenger Seat Belt Unbuckled
• Traction Control Off
• Washer Fluid Low
• Oil Pressure Low
• Oil Modify Due
• Fuel Low
• Service Anti-lock Restriction System
• Service Electronic Throttle Control
• Service Power Steering
• Prowl Control Off
• Cruise Control Fix
• ACC Driver Override
• Cruise Control Set To 30 MPH
• Tire Pressure Screen With Low Tire(s) "Inflate Tire to Twenty"
• Service Tire Pressure Organisation 3
• Speed Warning Set To Xxx MPH
• Speed Alert Exceeded
• Parking Brake Engaged
• Restriction Fluid Depression
• Service Electronic Braking Arrangement
• Engine Temperature Hot
• Lights On
• Right Forepart Turn Indicate Calorie-free Out
• Correct Rear Turn Signal Light Out
• Left Front Plough Signal Calorie-free Out
• Left Rear Plow Betoken Calorie-free Out
• Ignition Or Accompaniment On
• Vehicle Not In Park
• Remote Start Active Button First Push button — If Equipped
• Remote Outset Canceled Fuel Depression — If Equipped
• Remote Start Canceled Door Open — If Equipped
• Remote Outset Canceled Hood Open — If Equipped
• Remote Get-go Canceled Liftgate Open — If Equipped
• Remote Start Canceled Time Expired — If Equipped
• Remote Starting time Disabled Offset To Reset — If Equipped
• Service Air Bag System
• Service Air Bag Warning Light
• Door Open
• Doors Open
• Liftgate Open
• Hood Open
• Shift Not Allowed
• Vehicle Speed Is As well Loftier To Shift To D
• Vehicle Speed Is Likewise Loftier To Shift To R
• Vehicle Speed Is Too Loftier To Shift To P
• Service Transmission
• Service Shifter
• Service Air Intermission System
• Normal Ride Height Achieved
• Aerodynamic Ride Height Accomplished
• Off Route 1 Ride Height Achieved
• Off Road 2 Ride Pinnacle Achieved
• Entry/Exit Ride Acme Accomplished
• Selected Ride Acme Not Permitted
• Service Air Suspension Arrangement Immediately
• Reduce Speed To Maintain Selected Ride Height
• Air Suspension System Cooling Downwards Please Await
• Vehicle Cannot Be Lowered Door Open up
• Air Suspension Temporarily Disabled
• Battery Depression Start Engine To Alter Ride Height

For further information on the color warning and indicator lights in the instrument cluster, refer to "Warning Lights And Messages" in "Getting To Know Your Instrument Console".

Instrument Cluster Brandish Carte Items

The instrument cluster display can be used to view the master menu items for several features. Use the upward and down arrow buttons to scroll through the commuter interactive display menu options until the desired menu is reached.

NOTE:

Depending on the vehicle's options, characteristic settings may vary.

Tachometer With Digital Speedometer Supplemental Gauge Speedometer

Non - SRT

Push and release the upwards or down arrow button until the main gauge menu icon is displayed in the instrument cluster display. Push and release the left or right pointer button to select the analog or digital blazon speedometer brandish. Push and release the OK button to toggle units (mph or km/h) of the speedometer.

SRT

Button and release the up or downwards arrow button until the master gauge carte du jour icon is displayed in the instrument cluster display. Button and release the left or correct arrow buttons to change betwixt large and modest speedometer display. Push button and release the OK button to toggle units (mph or km/h) of the speedometer.

Vehicle Info

Push and release the up or downward arrow button until the Vehicle Info menu icon is displayed in the instrument cluster display. Push and release the left or right arrow push button to scroll through the information submenus and push and release the OK button to select or reset the resettable submenus.

NON — SRT
Tire Pressure	Oil Pressure level
Transmission Tempera- ture	Oil Life
Oil Temperature	Bombardment Voltage
Diesel Frazzle Fluid Level — If Equipped

SRT
Transmission Tempera- ture	Intake Air Temperature
Oil Temperature	Engine Torque
Oil Pressure	Engine Power
Air/Fuel Ratio – If Equipped	Heave Pressure — If Equipped
I/C Coolant Temperature — If Equipped

Terrain — If Equipped

Push button and release the upward or downwards arrow button until the Terrain icon/title is highlighted in the instrument cluster display. Push and release the right or left arrow push to display the Selec-Track or Drivetrain.

Push and release the upward or down arrow button until the Terrain icon/title is highlighted in the musical instrument cluster display. Push and release the right or left arrow push to display the Selec-Terrain, Air Interruption, Drivetrain, and Bicycle Articulation.

SRT

• Selec-Rails — If Equipped
• Drivetrain: Forepart Bike Angle, T-Case, Axle Lock

Non – SRT

• Selec-Terrain: Displays letters concerning Selec-Terrain status.
• Air Suspension — If Equipped: Displays messages apropos Air Suspension status.
• Drivetrain: Displays information on drivetrain condition of Front Wheel Angle, T-Case, and Axle Lock.
• Wheel Joint: Displays electric current bicycle articulation.

Operation Features — If Equipped

Push and release the up or downward arrow push until the SRT icon/title is highlighted in the instrument cluster brandish. Push button and release the left or right pointer button to gyre through the operation feature submenus.

The Performance Features include the following:

• 0-60 MPH (0-100 km/h) Timer
• Best
• Terminal
• Recent
• Reaction Fourth dimension — If Selected
• 0-100 MPH (0-160 km/h) Timer
• Best
• Terminal
• Recent
• Reaction Time — If Selected
• 0-lx feet (0-18 meters) Timer
• All-time
• Last
• Recent
• Reaction Time — If Selected
• ane/8 Mile (200 meters) Timer
• Best
• Terminal
• Recent
• Reaction Time — If Selected
• 1/4 Mile (400 meters) Timer
• Best
• Final
• Contempo
• Reaction Time — If Selected
• Braking Altitude
• Distance
• From Speed
• Current M-Forces
• Pinnacle K-Forces
• Lap Timer
• Lap History
• Volition list the last four laps with the all-time lap highlighted in green.
• Top Speed

Driver Assist

Push and release the upwardly or downwards pointer button until the Driver Assist menu championship is highlighted in the instrument cluster display.

Adaptive Cruise Control (ACC) Carte du jour — If Equipped

The musical instrument cluster display displays the current ACC and LaneSense system settings. The information displayed depends on the status of ACC and LaneSense.

Push the Adaptive Cruise Control (ACC) on/off push (located on the steering cycle) until one of the following displays in the instrument cluster brandish:

Adaptive Cruise Control Off

When ACC is deactivated, the display volition read "Adaptive Cruise Control Off."

Adaptive Cruise Control Ready

When ACC is activated but the vehicle speed setting has non been selected, the display will read "Adaptive Cruise Control Set."

Push button and release the Ready + or the Ready- push button (located on the steering wheel) and the post-obit volition brandish in the musical instrument cluster display:

ACC SET

When ACC is gear up, the set speed volition display in the instrument cluster

The ACC screen may brandish once again if any ACC activity occurs, which may include any of the following:

• System Cancel
• Driver Override
• System Off
• ACC Proximity Alarm
• ACC Unavailable Alert

Note:

The musical instrument cluster brandish will render to the last display selected afterward five seconds of no ACC brandish activity.

Refer to "Adaptive Cruise Command (ACC) — If Equipped" in "Starting And Operating" for further information.

LaneSense — If Equipped

The musical instrument cluster display displays the electric current Lane- Sense organization settings. The information displayed depends on LaneSense organization status and the conditions that demand to be met. Refer to "LaneSense — If Equipped" in "Starting And Operating" for further data.

Fuel Economy

Push and release the upwardly or down arrow push until the Fuel Economy Icon is highlighted in the instrument cluster display. Push and concord the OK button to reset boilerplate fuel economy characteristic.

Toggle left or right to select a display with or without Current Fuel Economic system Information.

• Range – The display shows the estimated distance (mi or km) that can be traveled with the fuel remaining in the tank. When the Range value is less than thirty miles (48 km) estimated driving altitude, the Range display volition modify to a "RANGE LOW" message. Adding a significant amount of fuel to the vehicle will plow off the "RANGE LOW" message and a new Range value volition display. Range cannot exist reset through the OK button.

NOTE:

Significant changes in driving fashion or vehicle loading will profoundly bear upon the actual drivable altitude of the vehicle, regardless of the Range displayed value.

• Boilerplate – The display shows the boilerplate fuel economy (MPG, 50/100 km, or km/L) since the last reset.
• Electric current – This display shows the electric current fuel economy (MPG, L/100 km, km/L) while driving.

Trip info

Push and release the up or down arrow button until the Trip menu title is displayed in the instrument cluster display. Toggle the left or right arrow push button to select Trip A or Trip B. The Trip information will display the post-obit:

• Distance – Shows the total distance (mi or km) traveled for Trip A or Trip B since the last reset.
• Average Fuel Economic system – Shows the average fuel economy (MPG or L/100 km or km/50) of Trip A or Trip B since the last reset.
• Elapsed Time – Shows the total elapsed time of travel since Trip A or Trip B has been reset.

Hold the OK button to reset feature information.

Stop / Offset – If Equipped

Push button and release the upwardly or down arrow button on the steering wheel to scroll to the Stop/Starting time menu in the driver interactive display.

For further data on the use and different modes of the Stop/Kickoff Organization, refer to "Stop / Get-go System – If Equipped" in "Starting And Operating".

Sound

Push and release the up or downwardly arrow button until the Audio menu championship is displayed in the instrument cluster display.

Stored Letters

Push button and release the upwards or down arrow push until the Messages Carte Icon is highlighted in the musical instrument cluster display. This feature shows the number of stored alert messages. Pushing the left or correct arrow button will allow you to scroll through the stored messages.

Screen Setup

Push and release the up or down arrow push button until the Screen Setup Menu Icon/Title is highlighted in the instrument cluster brandish. Push button and release the OK button to enter the submenus and follow the prompts on the screen as needed. The Screen Setup feature allows you lot to change what information is displayed in the musical instrument cluster also as the location that data is displayed.

Screen Setup Commuter Selectable Items

Gear Display

• Full (default setting)
• Unmarried

Upper Left

• None
• Compass (default setting)
• Outside Temp
• Time
• Range
• Fuel Economy Boilerplate
• Fuel Economic system Electric current
• Trip A
• Trip B

Upper Right

• None
Compass
• Exterior Temp (default setting)
• Fourth dimension
• Range
• Fuel Economy Boilerplate
• Fuel Economy Electric current
• Trip A
• Trip B

Defaults (Restores All Settings To Default Settings)

• Abolish
• Restore

Current Gear

• On
• Off (default setting)

Favorite Menus

• Speedometer
• Vehicle Info
• Terrain (evidence/hide)
• SRT Performance Pages (prove/hide)
• Driver Help (show/hibernate)
• Fuel Economy (show/hide)
• Trip Info (show/hibernate)
• Stop/Start
• Sound (show/hibernate)
• Letters
• Screen Setup
• Diagnostic Codes — SRT
• Speed Warning — SRT

The menu with (show/hide) means user can press OK button to cull show or hide this menu on the instrument cluster display.

Diagnostics — SRT

Push button and release the up or down pointer button until the Diagnostics icon/championship is highlighted in the instrument cluster display. Push and release the OK button to brandish the diagnostic trouble codes and descriptions. When the end of the list is reached, "No or End of Diagnostic Code" volition appear in the musical instrument cluster display.

Speed Warning — SRT

Push and release the upwards or down arrow push until the Speed Warning Menu icon/title is displayed in the instru- ment cluster display. Push and release OK to enter speed warning. Apply the up or down arrow push button to select a desired speed, then push button and release OK to set the speed. The white passive speed limiter telltale will light up with a notification text message (Speed Warning Set to Twenty, followed by the selected unit). When the set speed is exceeded, an audible chinkle will sound until the speed is no longer exceeded. The white passive speed limiter telltale will turn yellow and volition flash, and a popular up message of "Speed Warning Exceeded" will display.

NOTE:

You can turn the Speed Alarm off by using the up/down arrows to scroll through speed list and select OFF at the bottom of the listing.

Bombardment Saver On/Battery Saver Style Message — Electric Load Reduction Actions (If Equipped)

This vehicle is equipped with an Intelligent Battery Sensor (IBS) to perform additional monitoring of the electrical organization and status of the vehicle battery.

In cases when the IBS detects charging system failure, or the vehicle battery conditions are deteriorating, electrical load reduction deportment will take place to extend the driving time and distance of the vehicle. This is done by reducing ability to or turning off non-essential electrical loads.

Load reduction is merely active when the engine is running. It volition display a bulletin if there is a risk of battery depletion to the bespeak where the vehicle may stall due to lack of electrical supply, or will non restart after the current drive cycle.

When load reduction is activated, the bulletin "Battery Saver On" or "Battery Saver Style" will announced in the instrument cluster display.

These messages indicate the vehicle bombardment has a low country of accuse and continues to lose electrical accuse at a rate that the charging system cannot sustain.

NOTE:

• The charging system is independent from load reduction. The charging system performs a diagnostic on the charging system continuously.
• If the Battery Charge Warning Light is on it may indicate a trouble with the charging system. Refer to "Battery Charge Warning Lite" in "Warning Lights And Letters" located in "Getting To Know Your Instrument Panel" for further information.

The electrical loads that may be switched off (if equipped), and vehicle functions which can be effected past load reduction:

• Heated Seat/Vented Seats/Heated Bicycle
• Rear Defroster And Heated Mirrors
• HVAC Arrangement
• 150W Power Inverter System
• Audio and Telematics System

Loss of the battery charge may betoken one or more of the following conditions:

• The charging system cannot evangelize enough electrical power to the vehicle system because the electrical loads are larger than the adequacy of charging organisation. The charging system is all the same functioning properly.
• Turning on all possible vehicle electrical loads (eastward.thou. HVAC to max settings, outside and interior lights, overloaded ability outlets +12 Volts, 150W, USB ports) during certain driving weather (metropolis driving, towing, frequent stopping).
• Installing options like additional lights, upfitter electrical accessories, sound systems, alarms and similar devices.
• Unusual driving cycles (brusque trips separated past long parking periods).
• The vehicle was parked for an extended menses of time (weeks, months).
• The battery was recently replaced and was not charged completely.
• The battery was discharged by an electric load left on when the vehicle was parked.
• The battery was used for an extended menstruum with the engine not running to supply radio, lights, chargers, +12 Volt portable appliances like vacuum cleaner'due south, game consoles and like devices.

What to do when an electrical load reduction action message is present ("Battery Saver On" or "Battery Saver Style")

During a trip:

• Reduce power to unnecessary loads if possible:
• Plough off redundant lights (interior or outside)
• Check what may be plugged in to ability outlets +12 Volts, 150W, USB ports
• Check HVAC settings (blower, temperature)
• Check the audio settings (book)

After a trip:

• Check if any aftermarket equipment was installed (additional lights, upfitter electric accessories, sound systems, alarms) and review specifications if any (load and Ignition Off Depict currents).
• Evaluate the latest driving cycles (altitude, driving time and parking time).
• The vehicle should take service performed if the message is still nowadays during consecutive trips and the evaluation of the vehicle and driving design did non help to identify the cause.

Download Transmission

Source: https://jeepgrandcherokeenj.com/info/owners-manuals/2020/instrument-cluster-display/

Share this post